Corrosion Fluid Products Corp.

Truck Donation to Mitch Albom's Have Faith Haiti Mission

2010-12-28T15:04:00.004-05:00

From Left to Right: Joe Andronaco Jr. (President), Mark Mendelsohn, (Project Coor. for HFHM) and Joe Andronaco Sr. (CEO)

Click Here to Listen to Joe Sr.'s Interview with Mitch Albom About the Donation

Originally published on Mitch Albom's Website:

" Mobility is crucial to the survival of the Have Faith Haiti Mission. Without the ability to travel independently, the Mission can be cut off from people and much-needed supplies. Joe Andronaco, Sr. of Corrosion Fluid Products Corp. in Farmington, MI donated a Ford F-450 truck with a 12' flatbed to us to use in Haiti. It is a used truck, but he insisted on cleaning it and fixing it up before donating. We are so thankful for his generous gift. "

Click Here to Listen to Joe Sr.'s Interview with Mitch Albom About the Donation

Mitch Albom is an internationally renowned and best-selling author (Tuesdays with Morrie), journalist, screenwriter, playwright, radio and television broadcaster and musician.

Landia Chopper Pumps, Mixers, Aerators & More

2010-12-02T08:57:00.003-05:00

Now Supplied by Corrosion Fluid Products Corp.

Click on a Product Category for more information:

Landia Chopper Pumps
Landia Mixers, Flowmakers & Recirculation Pumps
Landia GasMix - Mixing System for Anaerobic Digesters
Landia Aerators - AirJet
Landia Hygienisation Units - ®BioChop

Availability: Illinois, Iowa

XOMOX® Valves and Actuators Supplied

2010-08-05T08:28:00.004-04:00

Corrosion Fluid Products Corp. proudly supplies XOMOX® Valves and Actuators to the fluid handling and chemical process industries in Northern Ohio and Western Pennsylvania. XOMOX® process valves and actuators offer the broadest range of materials, sizes, pressure classes, and temperature ratings.

XOMOX® manufactures their products to ANSI, JIS and DIN standards, including a complete line of valves:

XOMOX Quarter-turn sleeved plug valves

XOMOX Ball valves

XOMOX High performance butterfly valves

XOMOX Lined plug, ball and butterfly valves

Visit our website, http://www.corrosionfluid.com/ for more information.

CFPC Appears on Crain’s Private 200 List for Third Year in A Row

2010-05-19T10:14:00.002-04:00

May 2010

For the third year in a row, Corrosion Fluid Products Corp. has appeared on Crain’s Detroit Business Magazine’s Private 200 List of Metro Detroit’s largest privately held companies. Our ranking of 151st on the list is up from last year's ranking of 155th. This year's Crain's Private 200 List was originally published on May 17th, 2010.

See Corrosion Fluid Products Corp. on the 2010 Crain’s Private 200 List

CFPC Now Supplier of Gamajet Tank Cleaning Spray Equipment

2010-04-30T16:45:00.010-04:00

Corrosion Fluid Products is pleased to announce the addition of Gamajet Tank Cleaning & Spray Equipment to our extensive line of fluid handling products and services.

Gamajet Tank Cleaning Systems for Small Tanks: Up to 5' in Diameter
E-Z7 Smallest Rotary Impingement Cleaner
All-In-One Includes a suction capability as well for Barrel Cleaning Bung Up
All-In-One Flex Includes a suction capability as well for Barrel Cleaning Bung Up and Stacked
HD-Barrel Blaster Perfect for Cleaning Barrels and 55 Gallon Drums

Gamajet Tank Cleaning Systems for Mid-Sized Tanks: 5'-20' in Diameter
VI Small in size with a flo-thru design
Aseptic VI Small in size, sanitary flo-thru design with a variety of sanitary inlet adaptors options IX Tote Blaster Highly durable and affordable, perfect for totes.
V Compact cleaning for a wide variety of vessels with directional unit option
AlphaFP Fuel polishing capabilities, perfect for USTs and ASTs under 1250 Gallons

Gamajet Tank Cleaning Systems for Large Tanks: 20'-200' in Diameter
Aseptic-1 Designed to fit in standard UST inlets with fuel polishing capabilites
X Designed to fit in standard UST inlets with fuel polishing capabilites
E-Z8 Powerful and versatile yet smaller & more durable than most large tank cleaners
IV The most powerful automated tank cleaner on the market

VersaGrate Hold-Down Clips for Fiberglass (FRP) Grating

2009-10-26T16:07:00.002-04:00

VersaGrate offers a variety of specialty hold-down clips to help secure grating to structural supports. Each clip is specifically designed for our grating and plate products. All clips are made of 316SS for maximum corrosion resistance.

VersaGrate recommends placing clips every 48", using a minimum of 4 clips on any piece of grating and 8 clips on a full 4' x 12' panel.

More Information on VersaGrate Hold-Down Clips for Fiberglass (FRP) Grating

Download the VersaGrate Fiberglass (FRP) Grating Product Catalog

Versagrate Fiberglass (FRP) Plates

2009-10-26T16:02:00.002-04:00

Whether installed over existing grating or used as a non-slip surface over concrete or other solid surfaces, VersaGrate's fiberglass plate creates a durable and safe walking surface.

Fiberglass plate is made by laminating sheets of fiberglass mats with VersaGrate's high quality resin systems. Grit top surface is standard on all plate products, providing an excellent anti-slip walking surface that is superior to diamond plate, as well as other solid plate products. Fiberglass plate is also lightweight and easy to cut, making installation easy and inexpensive.

Fiberglass plate is available in the same resins and colors as standard Versagrate products. Other colors, resins, custom thicknesses, and panel sizes are available for special order.

Both VersaGrate's fiberglass plate and covered grating should be installed using mechanical fasteners. VersaGrate's F-Clip provides a solid anchor point, while eliminating tripping hazards associated with higher profile fasteners.

More Information on Versagrate Fiberglass (FRP) Plates

Download the VersaGrate Fiberglass (FRP) Grating Product Catalog

Versagrate Fiberglass (FRP) Covered Grating

2009-10-26T15:55:00.003-04:00

VersaGrate covered grating is a one piece molded grating, combining the solid surface of a plate and the structural support of molded grating. Covered grating is available in a variety of thicknesses, ranging from 1-1/8" to 2-1/8". Grit top surface is standard on all covered grating products, creating a safe walking surface.

Covered grating is ideal for applications that require no permeation of the grating. Whether over a food process or for reducing fumes or odors, covered grating meets the need for solid surface decking that is both corrosion resistant and slip resistant. It is also used in areas where cart wheels or shoe heels might otherwise have difficulty over standard open mesh grating.

Covered grating is available in the same resin systems as Versagrate standard fiberglass grating. Standard colors are green, light gray, and yellow. Custom resins and colors area vailable for special order.

More Information on Versagrate Fiberglass (FRP) Covered Grating

Download the VersaGrate Fiberglass (FRP) Grating Product Catalog

Versagrate Fiberglass (FRP) Structural Shapes

2009-10-26T15:50:00.003-04:00

Fiberglass structural shapes have one of the highest strength-to-weight ratios of any structural product, as well as superior corrosion resistance. Glassmat and roving are drawn through a resin bath and pulled through a heated die to form the desired shape. This process can yield almost any profile shape commonly used in structural construction. Fiberglass structural shapes are dimensionally stable, as well as thermally and electrically non-conductive.

Easy to fabricate as well as lightweight, fiberglass structural shapes are also easy to install, reducing costs associated with special lift equipment and tools.

VersaGrate structural shapes are available in a wide variety of shapes, including I-beam, equal leg angle, unequal leg angle, channel, square tube, and round tube. Concrete embedment angle is also available in a variety of sizes for use in areas where traditional metal embedment angle may corrode prematurely.

Fiberglass (FRP) Structural Shape Resins
PFR-25: A high-grade polyester resin for use in most applications where good corrosion resistance is required. ASTM flame spread rating of 25 or less.

VFR-25: A premium-grade vinylester resin for use in applications where extreme corrosion resistance is required. ASTM flame spread rating of 25 or less.

More Information on Versagrate Fiberglass (FRP) Structual Shapes

Download the VersaGrate Fiberglass (FRP) Grating Product Catalog

VersaTread Fiberglass (FRP) Stair Covers by VersaGrate

2009-10-26T15:40:00.002-04:00

VersaTread fiberglass stair tread covers provide an excellent alternative to stair tread replacement, combining slip-resistance with corrosion resistance. Simply place the pre-molded cover over existing stairs and secure using VersaGrate's F-clip. It's quick, easy, and instantly transforms worn out or damaged stair treads!

The aluminum oxide grit surface provides an extremely slip-resistant stair tread, even when wet or oily, for maximum safety. The integral yellow nosing allows for higher visibility, reducing trip hazards and improving OSHA compliance, all done with a minimum investment.

The standard panel size for stair tread covers is 13-1/2" deep by 12' long. Simply trim the panel to the desired depth and cut to the correct width. Plus, VersaTread stair tread covers can be pre-fabricated to any depth and width, ready-to-install from the factory!

More Information on VersaTread Fiberglass (FRP) Stair Covers

Download the VersaGrate Fiberglass (FRP) Grating Product Catalog

VersaTread Fiberglass (FRP) Stair Treads by Versagrate

2009-10-26T15:35:00.006-04:00

VersaTread fiberglass stair treads combine the unique features of fiberglass grating with an easy-to-fabricate panel. Waste is virtually eliminated by the double-bar cutting channel conveniently spaced every six inches, leaving a solid bar on each side of the cut. No nubs to cut off between treads equals no wasted grating!

Standard panel size is 1-1/2" thick, 22-3/4" wide by 12' long with tread nosing on each side of the panel, allowing treads to be cut from both sides. Standard mesh is 1-1 /2" by 6".

All VersaGrate fiberglass stair treads utilize a gritted nosing for added slip-resistance. This nosing contrasts with the color of the stair tread, increasing visibility and reducing slip/fall accidents.

VersaGrate fiberglass stair treads are available pre-fabricated and ready-to-install!

More Information on VersaTread Fiberglass (FRP) Stair Treads

Download the VersaGrate Fiberglass (FRP) Grating Product Catalog

Versagrate Pultruded Fiberglass (FRP) Grating

2009-10-26T15:29:00.004-04:00

VersaGrate offers a wide range of pultruded fiberglass grating products, including a variety of thicknesses, open areas, cross bar spacing, surfaces, colors and resins. Pultruded grating is often used where spans are longer than molded grating can allow, and chemical resistance requirements aren't as high.

Grating Resins
PFR-25: A high-grade polyester resin for use in most applications where good corrosion resistance is required. ASTM flame spread rating of 25 or less.

VFR-25: A premium-grade vinylester resin for use in applications where extreme corrosion resistance is required. ASTM flame spread rating of 25 or less.

More Information on Versagrate Pultruded Fiberglass (FRP) Grating and Options

Download the VersaGrate Fiberglass (FRP) Grating Product Catalog

Versagrate Molded Fiberglass (FRP) Grating and Options

2009-10-26T15:19:00.007-04:00

VersaGrate specializes in molded fiberglass grating, offering a wide variety of meshes, panel sizes, grit surfaces, colors, and resins. Whether the problem you're looking to solve involves strength, safety, corrosion, or installation costs, VersaGrate is your versatile solution.

Grating Resins

PFR-25: A high-grade polyester resin for use in most applications where good corrosion resistance is required. ASTM flame spread rating of 25 or less.

VFR-25: A premium-grade vinylester resin for use in applications where extreme corrosion resistance is required. ASTM flame spread rating of 25 or less.

FFR-35: A sanitary, food-grade polyester resin for use in the food, dairy, or meat packing industry. Food compatible ingredients are used in the fire-retardant additive, giving a flame spread rating of 35 or less.

Grating Meshes
VersaGrate offers a variety of mesh patterns for molded fiberglass grating. The most common are 1-1/2" square, 2" square, and 1" x 4" rectangular.

1-1/2" square mesh is by far the most popular, and is available in a variety of thicknesses.

Grating Surfaces
Slip and fall accidents are one of the greatest dangers in an industrial environment, costing employers both time and money. Versagrate offers a wide variety of anti-slip surfaces to help eliminate this danger:

Embedded Grit:
Grit is added to the mold after the grating has been laid but not cured. Grit and resin are forced into the top of the grating and allowed to cure with the grating. A clean, durable grit surface.

Post-cure Grit: After the grating is cured and removed from the mold, grit is applied to the top of the grating with a strong adhesive. The grit surface is heat-cured with an additional top coat of adhesive for a maximum bond.

Meniscus: No grit is added to the surface after the grating is removed from the mold. A natural anti-slip meniscus surface is formed during the curing process.

More Information on Versagrate Molded Fiberglass (FRP) Grating and Options

Download the VersaGrate Fiberglass (FRP) Grating Product Catalog

Fiberglass (FRP) Grating, Stair Products & Structural Shapes from VersaGrate

2009-10-26T12:23:00.011-04:00

Browse Our Fiberglass (FRP) Grating Product Information:
Benefits of Versagrate Fiberglass (FRP) Grating
Molded Fiberglass (FRP) Grating and Options
Pultruded Fiberglass (FRP) Grating
Fiberglass (FRP) Stair Treads & Covers
Fiberglass (FRP) Structural Shapes
Fiberglass (FRP) Covered Grating
Fiberglass (FRP) Plates
Grating Clips

Benefits of VersaGrate Fiberglass (FRP) Molded & Pultruded Grating:
　
STRENGTH
With one of the highest strength-to-weight ratios of any material, VersaGrate fiberglass (FRP) grating is strong and durable, ready for years of dependable use. Unlike steel, VersaGrate has "memory", and will spring back to its original shape when deflected. Even major impacts inflict little damage with no failure.

CORROSION RESISTANCE
The key feature of VersaGrate fiberglass (FRP) grating is corrosion resistance. With a variety of premium resin systems, VersaGrate fiberglass (FRP) grating is the choice for a wide range of corrosive environments. It will not rot, rust or corrode, providing many years of use with little or no maintenance. No scraping or painting required.

SLIP RESISTANCE
Slip and fall accidents are the single most expensive and common type of industrial accident. Choose VersaGrate with either silica grit top or all-resin meniscus top, and regain sure footing in slippery work areas. Water, oils, detergents, and food byproducts are no match for VersaGrate fiberglass (FRP) grating, stair treads, stair covers and floor plates.

FABRICATION AND INSTALLATION
VersaGrate fiberglass (FRP) grating products are easily cut with standard power tools, using masonry or diamond embedded blades. We recommend using a worm gear driven circular saw, but standard tools can be used for most cutting. Also, there's no steel cutting, banding or welding, which require specialized tools and often require facility permits. Fiberglass (FRP) grating is lightweight and easy to handle, requiring no special lifting or installation equipment.

FLEXIBILITY AND ERGONOMICS
Do your employees notice the hardness of their work floor surfaces? Does that contribute to on-the-job fatigue? VersaGrate fiberglass (FRP) grating is naturally flexible, providing a comfortable, non-skid surface that is easy to stand on. An ergonomic work floor reduces fatigue and injury, and increases productivity, contributing to a better work environment.

LIGHT WEIGHT
Have you ever tried to lift a panel of steel grating without a crane or lift? Two men can easily and comfortably lift a 4 foot by 12 foot panel of VersaGrate fiberglass (FRP) grating. With an average weight of around 3 to 4 pounds per square foot, VersaGrate fiberglass (FRP) grating is easy to carry and install. It's also easy to remove for maintenance access or cleaning underneath. Simply unscrew the clips and lift out. No special lifting equipment required!

PRICE COMPETITIVE
VersaGrate fiberglass (FRP) grating is competitively priced when compared to other fiberglass grating manufacturers, including: Fibergrate, Chemgrate, Strongrate, Strongwell, AMD Grating, American Grating, McNichols Co., Creative Pultrusions, Inc., FRP Grating, Inc., Chinagrate, Seasafe, Precisioneering, Delta Composites & more.

Download the VersaGrate Fiberglass (FRP) Grating Product Catalog on Our Website, www.corrosionfluid.com

Heat Tracing & Controls from Chromalox and Corrosion Fluid Products

2009-10-13T15:41:00.004-04:00

Heat Tracing & Controls from Chromalox and Corrosion Fluid Products

Custom Engineering Solutions
Corrosion Fluid Products and Chromalox will custom-design the right heat tracing and control product to meet your needs. We will customize an existing product or design, or manufacture a new one to fit application. Our goal is to provide the right heat solution for you.

Wherever there's a need for heat and temperature control, Chromalox has experience.With the broadest product line in the industry, Chromalox provides heat and control systems for more processes than anyone in the world. They provide solutions for a diverse group of industries: Alternative Fuels Processing, Bio-Pharmaceutical, Commercial Food Equipment, Medical Equipment, Marine, Power Generation, Petrochemical, Transportation, Wastewater Treatment the Military and more.

Click on a Product Category or Scroll Down to Browse:

Heat Tracing Products
Controls, Panels & Sensors
Industrial Heaters
Packaged Systems

Heat Tracing Products

Heat Tracing Products from Chromalox & CFPC
Industrial Heat Tracing
Commmercial Heat Tracing
Light Commercial Heat Tracing
Refrigeration Heat Tracing

Controls, Panels & Sensors

Controls, Panels & Sensors from Chromalox & CFPC
Temperature Controls
Power Control Components
Power Control Panels
Electomechanical & Thermostats Heat Sensors

Industrial Heaters

Industrial Heaters from Chromalox & CFPC
Component Heaters
Immersion Heaters
Circulation Heaters
Process Air & Radiant Heaters
Comfort Air & Radiant Heaters

Packaged Systems

Packaged Systems from Chromalox & CFPC
Heat Transfer & Vaporizer Systems
Large Tank Heating Systems
Boilers & Steam Generators
Air Handlers & Load Banks

Request a Quote

Pumps, Pump Repairs, Valves & Automation, Piping, Hoses, Mechanical Seals, & More

2009-09-11T12:11:00.000-04:00

Pumps, Pump Repairs, Valves & Automation, Piping, Hoses, Mechanical Seals, & More: "Corrosion Fluid Products Corp. is a full service stocking distributor, representing the world's top manufacturers of corrosion-resistant and engineered fluid handling equipment, including Process Pumps, Valves & Automation, Fiberglass Pipe, Teflon-Lined Steel Pipe, Teflon-Lined Hoses, Mechanical Seals and more for the chemical & fluid process markets.

We also support what we sell, providing quality services such as Pumps & Equipment Repairs, Valve Automation Assemblies, Pipe Fabrication, Welded Hose Fabrications and Skid-Mounted Pump Systems. Our experienced shop mechanics are factory certified and fully capable to handle any fabrication and repair."

CFPC Now Offering RamParts® Diaphragm Pumps

2009-09-02T14:51:00.009-04:00

From Our Diaphragm Pumps Page:

RamParts® Heavy Duty Air Operated Diaphragm Pumps (AOD's)

Heavy-Duty Construction

The rugged construction and extra-thick casing of RamParts® air-driven diaphragm pumps stand up to the abuses of the most demanding sludge and slurry applications. They overcome the “high-wear” problem commonly found in double diaphragm and progressive cavity pumps. Air-driven diaphragm pumps are capable of operating dry on suction lifts up to 20 feet (6.5 m) and handling liquids with solids contents up to approximately 70%. Depending on the pump model, they will pass up to 3” (76 mm) diameter spherical solids. (Solids size determined by check valve type).

Pump stroke rate, discharge stroke time, suction drive pressure and discharge drive pressure can all be adjusted independently on RamParts diaphragm pumps. Pumps will easily handle heavy sludges at their rate of accumulation in clarifiers and settling basins. When it comes to handling heavy sludges and slurries, there’s only one name you need to know – RamParts®.

RamParts® Pumps Heavy Duty Air Operated Diaphragm Pumps (AOD's) PDF Brochure

Chemical Resistance Guide

RamParts® Pumps iPC Series- Integrated Pneumatic Controlled Diaphragm Pumps

RamParts® Pumps P Series- PLC-Controlled Diaphragm Pumps

New Pump Linings for Better Corrosion and Abrasion Resistance

From RamParts®' Website:...

We are very pleased to release the world's first borosilicate glass lined diaphragm pump and fully ETFE lined diaphragm pump! ETFE, also known as Tefzel® (DuPont’s trade-name), has outstanding chemical resistance up to 300°F. Glass offers similar chemical resistance to ETFE but with better abrasion resistance. The new linings will allow RamParts “iPC” & “P” series pumps to enter new applications where hard to handle corrosive fluids are used.

More Info on New RamParts® Diaphragm Pump Linings

Energy/Cost Saving Success Story from Corrosion Fluid Products

2009-08-27T15:32:00.005-04:00

Corrosion Fluid Products Saves Water Treatment Plant over $60,000 in 6 months!

Corrosion Fluid Products Corp. worked with a Water Treatment Plant in Indiana to improve the cleaning process of large media filters throughout the city’s water distribution system. A portable acid system was needed that could be taken to each location and used to clean the calcification on the filters. A lightweight and acid resistant solution was required, and engineers turned to Corrosion for a solution.

A heavy duty trailer was selected that can be disconnected and used on-site for multiple days at a time. The system was then fabricated and delivered to the customer in complete working order. The fiberglass tank, piping and valves, all supplied by Corrosion Fluid Products, provided an extremely lightweight but very acid resistant system. The flexibility of the system allowed the total filter cleaning time to drop from 3 weeks to 3 days and the plant also enjoyed a significant cost savings- over $60,000 during the first half of 2009!

View our Product Inventory: Pumps Valves Fiberglass Pipe/Piping Systems

Pumps & Systems Magazine Names Corrosion Fluid Products "Success Story of the Year" Finalist for 2009

2009-08-27T15:28:00.002-04:00

From the article:

Reducing Maintenance Costs for a Steel Mill Blast Furnace

A steel mill was experiencing maintenance problems with its four rubber-lined slurry pumps. The abrasiveness of the sludge would quickly wear out each pump's stuffing box sleeve and braided packing, and large solids would tear the rubber liner on the casing and impeller. Any flow interruption would cause the pumps to heat up and seize. The pumps required maintenance or rebuilding a couple times each month.

As replacement for the rubber-lined slurry pumps, Corrosion Fluid Products Corp. produced a high chrome cast pump that has a double mechanical seal with its own barrier fluid. The pump can run dry for extended periods of time and was made to combat the abrasive sludge and large solids destroying the steel mill's existing pumps.

The new pumps have been in place since 2004 and have yielded maintenance cost savings of $158,000 per year.

The article can be seen in July's issue of Pumps & Systems Magazine and online at http://www.pump-zone.com/pumps/vertical-turbine-pumps/success-story-of-the-year-2009-finalists-corrosion-fluid-products-corp.html

CFPC Appears on Crain’s Private 200 List for Second Year in A Row

2009-08-27T15:21:00.003-04:00

May 2009
For the second year in a row, Corrosion Fluid Products Corp. has appeared on Crain’s Detroit Business Magazine’s Private 200 List of Metro Detroit’s largest privately held companies. Our ranking of 155th on the list is up 20 spots from last year's ranking of 177th. With 2008 revenue of $81.3M,

Corrosion Fluid Products Corp. enjoyed a 13.1% increase in revenue over our 2007 total of $71.9M. This year's Crain's Private 200 List was originally published on May 28th, 2009.

See Corrosion Fluid Products Corp. on the 2009 Crain’s Private 200 List

Chromalox Announces CFPC as Authorized Heat Tracing/Heat Products Distributor

2009-08-27T15:12:00.002-04:00

Click Here to View Announcement Letter

Chromalox Inc. is pleased to announce the selection of CORROSION FLUID PRODUCTS CORP. as an Authorized Distributor of Comfort Heat, Heating Cable, and Process Solutions products in the Northern Ohio area.

As a world leader in electric heat and control equipment, Chromalox Inc. has experience in all facets of both the Industrial and Commercial markets. Chromalox Inc. heat and control products can be found in applications as diverse as Aerospace , Alternative Fuels, Building & Construction, Chemical Processing, Food Processing, Oil and Gas production, Power Generation and many others.

As an Authorized Distributor for Chromalox Inc., Corrosion Fluid Products Corp. can help you solve your toughest heat and control applications across all industry segments. With over 40 years as a market leading distributor, Corrosion Fluid Products Corp. stands ready to serve your electric heat and control needs.

CFPC Named Flowserve Pumps Top 3 Distributor for 2008

2009-08-27T15:08:00.006-04:00

Corrosion Fluid Products is proud to be among the top three distributors out of 54 in the country for Flowserve Pumps. Flowserve Pump Division’s Heritage product brands are the most recognized and most populated line of pumps in the industry. Brands such as Durco, Worthington, (IR) Ingersoll Rand, IDP, Byron Jackson, Pacific, Sier-Bath, Wilson Snyder, Aldrich and others are all underneath the Flowserve Pump umbrella.

Click Here to View Our Flowserve Pumps Inventory

Corrosion Fluid Products services these brands with an extensive parts inventory in four (4) major trading areas of the Midwest. Not only do we provide new Flowserve pump units, OEM parts and mechanical seals, we also repair them as well. Please see our new CF Pumpserve Pump Repair Video to see, hear and feel the exciting capabilities of our pump repair shops. Thank you for making us the foremost pump supplier in the Midwest!

Click to View Our Warehouse Surplus Sale

Announcing Our New Company Video, "The Corrosion Advantage"

2009-08-27T15:02:00.006-04:00

We are pleased to show our new company video, "The Corrosion Advantage," showcasing Corrosion Fluid Products Corp. and all of our capabilities.The video can be viewed on our About Us Page.

8,000 Sq. Ft. Expansion to Increase Pump Repair Capabilities in North Canton Branch

2009-08-27T14:51:00.005-04:00

In order to accommodate their growing pump repair business, Corrosion Fluid Products is pleased to announce the upcoming 8,000 sq. ft. expansion of its stocking branch and repair center in North Canton, Ohio. Corrosion will break ground in early October of this year, with land already being cleared for the project.

Increased capabilities will include two 10-ton cranes, full-size bay doors, and new machinery. These new additions and more will help Corrosion Fluid Products handle much larger pump repairs in the future.

The North Canton expansion is slated to wrap up in the spring. Stay tuned for more information.

Be sure to visit our pump repair website, www.cfpumpserve.com.

CFPC Appears on Inc. 5000 List of Fastest Growing Companies

2009-08-27T14:50:00.002-04:00

Corrosion Fluid Products Corp. has joined the ranks of America’s fastest-growing private companies by being named to the prestigious Inc. 5000 list in the annual Inc. Magazine national analysis.

From a letter sent to President Joe Andronaco from John Koten, Editor in Chief and CEO of Mansueto Ventures, Publisher of Inc.:

On behalf of Inc., I am delighted to recognize your accomplishment in earning the rank of 3124 of the 2008 Inc. 5000, which celebrates the fastest-growing private companies in America.

For more than 27 years, the Inc. 5000 has served as a benchmark for the most innovative, dynamic, and successful companies in the nation. As an Inc. 5000 honoree, Corrosion Fluid Products Corp. is now a member of the most influential business club in America. The company you keep is notable, as Inc. 5000 alumni include Bill Gates of Microsoft, Larry Ellison of Oracle, and many more.

Corrosion Fluid Products Corp. Inc.com Company Profile

CFPC Appears on Crain’s Private 200 List

2009-08-27T14:45:00.005-04:00

In May of 2008, Corrosion Fluid Products Corp. ranked 177 on Crain’s Detroit Business Magazine’s Private 200 List of Metro Detroit’s largest privately held companies. With 2007 revenue of $71.9M, Corrosion Fluid Products Corp. enjoyed a 27.7% increase in revenue over their 2006 total of $56.3 M. The Private 200 List was originally published on May 26th, 2008.

See Corrosion Fluid Products Corp. on Crain’s Private 200 List

Service-Disabled Veterans find Business Success

2009-08-27T14:04:00.003-04:00

Corrosion Fluid Products Featured in DiversityCareers.com Article

August 2009

From the Article:

Premium products for FirstEnergy
Corrosion Fluid Products Corp. (Farmington Hills, MI) provides high-end pumps, piping, valves and related components to diversified energy company FirstEnergy (Akron, OH), the fifth largest utility in the nation. Corrosion’s Fluids owner Joe Andronaco Sr. is proud of the business he’s built over more than forty years. “Our reputation is grounded in problem-solving and excellent service,” he states. “We pay attention to details and do what we say we will do.”

Andronaco, who has a disability rating from the U.S. Department of Veteran Affairs (VA), served four years in the Navy before his honorable discharge in 1956. Then he joined a pump company where he was influenced by the MEs and Navy officers he worked with. He earned a 1965 BSME on the GI Bill from Fairleigh Dickinson University (Teaneck, NJ); twenty years later he completed a three-month Harvard Business School management program.

He launched Corrosion Fluid Products Corp. in 1968. The company specializes in process pumps, valves & automation, fiberglass piping, Teflon-lined steel piping and hoses for the chemical, pharmaceutical, steel and utility industries as well as municipalities. His customers include Dow Chemical (Midland, MI), Abbot Labs (Abbot Park, IL) and Eli Lilly (Indianapolis, IN). About a quarter of his employees have engineering degrees.

Corrosion Fluid Products Corp. has eight stocking branches across the Midwest. “We are spread across several states as well as several industries,” Andronaco says. “We’re not impacted by the local geography or by having a limited product.”

Additional divisions of Corrosion include their PureServe Systems Sanitary Products Division and CF PUMPSERVE, Corrosion's Pump Repairs Division.

Pump Mechanical Seals from Flowserve, AESSEAL & More

2009-07-17T15:10:00.003-04:00

Corrosion Fluid Products proudly represents Flowserve Flow Solutions Division (Seal Group), offering a diverse selection of mechanical seals for any industry or application. Serving customers for over 80 years, the Flowserve family of Mechanical Seals includes Durametallic, Five Star, Borg Warner, Pacific-Weitz and Pac-Seal. These trusted mechanical seal brands provide you with a well balanced range of high quality products and services to satisfy all your sealing requirements.

Visit Flowserve.com for more mechanical seal information
Download Flowserve Flow Solutions Division Mechanical Seal PDF Brochure

Standard Cartridge Mechanical Pump Seals
Bellows Mechanical Pump Seals
Pusher Mechanical Pump Seals
Slurry Mechanical Pump Seals
Lift-off & Dry Running Mechanical Pump Seals
Mixer Mechanical Pump Seals
Compressor Mechanical Pump Seals
OEM & Special Duty Mechanical Pump Seals
Outside Mounted Mechanical Pump Seals
Mechanical Seal Accessories

Request a Quote

Flowserve Standard Cartridge Mechanical Seals
Flowserve standard cartridge mechanical seals such as the ISC seals are designed for general purpose applications on ANSI and DIN process pumps serving chemical processing, pulp and paper, oil and refining, food and beverage, water and wastewater, and other industries.
Learn More about Flowserve Standard Cartridge Mechanical Seals

Flowserve Bellows Mechanical Seals
The absence of a dynamic gasket in the bellows mechanical seal design eliminates the possibility of "hang-up," caused by build-up of deposits of gasket swell. A rotating bellow has the benefit of "self-cleaning action," disposing of particles or solids through centrifugal force.
Learn More about Flowserve Bellows Mechanical Seals

Elastomer Bellows

Welded Metal Bellows

Flowserve Pusher Mechanical Seals
Flowserve pusher mechanical seals incorporate secondary seals, called the dynamic gasket, that are pushed by springs axially along the shaft or sleeve to compensate for seal face wear or wobble due to misalignment.
Learn More about Flowserve Pusher Mechanical Seals

Flowserve Slurry Mechanical Seals
Flowserve has developed a complete range of sealing products for all types of slurries. They are engineered and built to last.
Learn More about Flowserve Slurry Mechanical Seals

Flowserve Lift-off & Dry Running Mechanical Seals
Gas seal technology and gas seal operation depends on aerostatic and aerodynamic forces. Careful design keeps the two faces separated by a gas film. Aerodynamic forces are created by the presence of a 'pattern' on one of the faces.
Learn More about Flowserve Lift-off & Dry Running Mechanical Seals

Flowserve Mixer Mechanical Seals
In chemical, pharmaceutical, food and oil refinery process plants, diverse systems are employed for agitating, blending and mixing products. The units require low maintenance operation and safety, both to protect the environment and the workplace.
Learn More about Flowserve Mixer Mechanical Seals

Flowserve Compressor Mechanical Seals
Centrifugal compressors and other turbomachinery are critical to the operation of a process plant. Selecting a manufacturer with well proven state-of-the-art low friction dry gas seals who can offer full field maintenance support is very important.
Learn More about Flowserve Compressor Mechanical Seals

Flowserve OEM & Special Duty Mechanical Seals
Original Equipment Manufacturers (OEM's) are very important for Flowserve FSD. Therefore Flowserve is committed to develop and supply designs for special equipment and for special duty requirements.
Learn More about Flowserve OEM & Special Duty Mechanical Seals

Flowserve Outside Mounted Mechanical Seals
Outside mounted seals are used in strongly corrosive applications. This arrangement allows seal designs that have no metal parts in contact with the process liquid.
Learn More about Flowserve Outside Mounted Mechanical Seals

Flowserve Mechanical Seal Accessories
Seal coolers, gas panels, bearing guards, separators, buffer fluid reservoirs, and more.
Learn More about Flowserve Mechanical Seal Accessories

AESSEAL® is one of the major specialists in the design and manufacture of mechanical seals and support systems. Mechanical seals are used in pumps and rotating equipment to prevent liquids and gases from escaping into the environment. Growth in excess of 25% per year has allowed AESSEAL® to become the only major international new entrant to the mechanical seals industry in the last twenty years. The current range of products is also expanding to cover new markets and niches. Continued improvement of existing products and design excellence help them achieve superior product performance.
Cartridge Mechanical Seals
Bearing Protection
Mechanical Seal Support Systems
Component Mechanical Seals

Chemically-Resistant Hoses: Teflon-Lined Hose, Flexible Metal Hose & Silicone Hose from Pureflex & More

2009-07-17T14:45:00.004-04:00

Teflon Lined Hose by PureFlex

Corrosion Fluid Products proudly carries a wide variety of PureFlex Teflon lined hoses. PureFlex hoses are engineered and manufactured for maximum flexibility and performance against the broadest range of chemicals, temperatures, and extremes.
Our PureFlex hose inventory Includes:

Rubber Covered:
FlexChem™ Hose

Convoluted Hose:
UltraChem™ Hose
MultiFlex™ Hose
ProFlex™ Hose

Smooth Bore Hose:
SmoothFlex™ Hose
MTH™ Hose

View Our Teflon Lined Hose Inventory

Flexible Metal Hose

U.S. Hose Corporation (formerly Senior Flexonics) has for over one hundred years established itself as the leader in flexible hose technologies.

"Our name and reputation are synonymous with quality, performance and customer satisfaction. U.S. Hose continues to be recognized throughout the industry as the leading provider of solutions to customer's specialized fluid handling requirements - past, present and future." U.S. Hose offers metal hose and braid with the widest selection of products, ranging from braided hose for value-oriented customers to super flexible hoses to ultra-high pressure and high temperature hoses that satisfy industry's most demanding applications.

View Our Flexible Metal Hose Inventory

Silicone Hose by PureFlex

PureFlex high purity Platinum cured silicone hose and tubing is manufactured from biopharmaceutical grade elastomer, meeting or exceeding Pharmacopeia USP 23 class VI, FDA 21CFR-177.2600, USDA and 3A criteria. Their hose and tubing is designed for maximum flexibility when utilized in fluid transfer, filling, and moving steam or air in pharmaceutical and biotech manufacturing processes.

Silicone Hose Options:
PureFlex PC65-W Series - Wire Reinforced Hose
PureFlex PC65-B Series - Nomex Braid Reinforced Hose
PureFlex PC50 & PC 65 Series - Clear Non-Reinforced Hose

View Our Silicone Hose Inventory

Pipe and Fittings for Corrosion Resistant Services: Fiberglass Pipe (FRP) & Teflon-Lined Piping Systems

2009-07-17T14:14:00.015-04:00

Corrosion Fluid Products has represented the premier manufacturers of Teflon-lined steel pipe and fiberglass (frp) piping for over 40 years. Our quality of product and reputation will provide peace of mind when you are transferring corrosive liquids in your plant. Safety of your plant personnel are first and foremost when we recommend and provide our equipment to your site.

Corrosion Fluid Products has the most extensive stock of any specialty pipe supplier in the Midwest, with capabilities to fabricate Teflon lined pipe spools within hours of receiving your order up to 8 inch diameters. With Conrac machines in many of our facilities, we are able to flare steel pipe to provide free floating flanges for easy flange alignment.

Our fiberglass pipe (FRP) fabrication ability allows for quick installation of special pipe configurations. Fittings, gaskets, and adhesives are available for immediate shipment.

View our Pipe Fabrication Capabilities

"Time Tested" Composite Fiberglass Piping Systems

Smith Fibercast fiberglass reinforced piping systems are "time tested" because they have proven their durability and value in harsh environments and unforgiving applications for decades. In fact, some of their buried fuel handling installations have been in the ground for 40 years.

Common chemicals transferred include: Sulfuric Acid (Battery Acid), Hydrochloric Acid, Sodium Hydroxide, Sodium Hypochlorite, Caustic Soda, Bleach & more.

FRP Piping Links:
Fiberglass Pipe Home
Benefits of Fiberglass Pipe
Fiberglass Piping Products Supplied
FRP Pipe Chemical Resistance Guide
Smith Fibercast FRP Pipe Overview (PDF)
Industries & Applications
Fiberglass Pipe Case Histories
Engineering & Installation of FRP Pipe
Fiberglass Pipe Installation Videos
Contact Us for More Info

Valves & Valve Automation from Flowserve, Durco, Worcester, Pureflex, Tricentric, FlowTek, Habonim, Dezurik, Kitz, Gemu, Ultraflo, ABZ, Orbinox & More

2009-07-17T13:49:00.005-04:00

Quarter Turn Valves

Plug Valves
Our selection of Flowserve Durco plug valves includes the Mach 1 High Performance, T-41 and T-43 Lined, G4 Sleeveline, G4B Marathon, and TSG4 Severe Service.

Ball Valves
Ball valve manufacturers represented include Flowserve, Pureflex, DeZURIK, Flow-Tek, KITZ, Habonim, and Velan.

Butterfly Valves
We carry a complete line of butterfly valves, including models from Pureflex, Flowserve, DeZURIK, Ultraflo, ABZ Valve, and Tricentric Valves.

Multi-Turn Valves

Gate Valves
Our selection of Orbinox and DeZurik gate valves will satisfy your fluid handling requirements.

Clamp and Pinch Valves
Our clamp and pinch valves include Crane Resistoflex PTFE Clamp Valves and Flexible Valve Pinch Valves.

Diaphragm Valves
Diaphragm valve manufacturers include Crane Resistoflex, Gemu, Asahi, and Nibco.

Globe Valves
We carry globe valves from Gemu, Asahi, and Dezurik.

Actuators and Controls

Consistency Transmitters

Pumps from Flowserve, Sundyne, Ansimag, HMD/KONTRO, Nikkiso, Alfa Laval, Pioneer, GPM, Ampco, Finish Thompson (FTI), Gorman-Rupp, Graco, Milton Roy..

2009-07-17T11:05:00.012-04:00

Corrosion Fluid Products proudly carries a wide variety of centrifugal and positive displacement (PD) pumps from the world's best manufacturers- Flowserve, Sundyne, Ansimag, HMD/KONTRO, Nikkiso, Alfa Laval, Pioneer, GPM, Ampco, Finish Thompson, Gorman-Rupp, Top Line, Graco, Milton Roy, Dorr-Oliver, Warren Rupp, Flowtech & More! Our large inventory of pumps means quick delivery when you need it most.

Centrifugal Pumps

ANSI Pumps
Our ANSI dimensioned pumps include Flowserve's Durco Mark 3, Durco F-Series, S-Series, M-Series and Guardian models, as well as Sundyne's Ansimag line of sealless pumps and Griswold's 811 ANSI pumps.

Sealless Pumps / Mag-Drive Pumps
Mechanical seals giving you headaches? We carry a complete line of environmentally-friendly sealless pumps. Brands include Ansimag, HMD/KONTRO, Nikkiso, Finish Thompson, and Flowserve Durco.

Split Case Pumps
Flowserve's line of heavy-duty split case pumps include the LR, LLR, & LNN models.

Vertical Pumps / Vertical Turbines / Vertical Immersion Sumps / In-Line Pumps
We offer several vertical pump types, include vertical turbines, vertical immersion sump, space-saving in-line pumps, and even sealless vertical pumps.

Self Priming Pumps
Self priming brands include Pioneer Pump, Sundyne Ansimag, Flowserve, HMD/KONTRO, Finish Thompson, and OTS pumps.

High Pressure Pumps
Have an application that requires high head or flow? Our high pressure pumps will meet your requirements.

Sanitary / High Purity Centrifugal Pumps
Our centrifugal sanitary pump range includes Alfa Laval, Top Line and Ampco pumps.

Solids Handling/Trash Handling Pumps
Pioneer's full line of trash handling pumps can handle your most aggressive industrial applications.

Slurry Pumps
From thick slurry to caustic chemicals, GPM's ELIMINATOR submersible and horizontal slurry pumps get the job done.

Submersible Pumps
Our line of submersible pumps can fit any application, and any price range.

End Suction Pumps
Available in many different configurations and covering a wide range of applications, our end suction pumps will meet your requirements.

Positive Displacement (PD) Pumps

Gear Pumps
Our selection of Flowserve gear pumps provide smooth, efficient fluid transfer.

Diaphragm Pumps
The most reliable and cost-efficient diaphragm pumps used in the processing industries by Graco & More.

Metering Pumps
Milton Roy pumps dose all traditional liquids used in water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products.

Sanitary Positive Displacement (PD) Pumps
Our extensive offering of sanitary positive displacement pumps include models from Alfa Laval, Flowtech, Graco, and Milton Roy.

Plunger/Reciprocating Pumps
Flowserve reciprocating pumps are designed with flexibility in mind.

Peristaltic Pumps
VECTOR peristaltic pumps are designed to handle the high viscosity fluids commonly found in industrial processing.

Welcome to Corrosion Fluid Products!

2009-07-17T10:29:00.008-04:00

Corrosion Fluid Products Corp. is proud to be a veteran owned company. Click Here for More Information

Established in Southeastern Michigan in 1968; Corrosion Fluid Products Corp. has steadily grown throughout the Greater Midwest and now operates ten (10) stocking branch operations. Our branch offices stretch as far west as Davenport, Iowa and as far east as Pittsburgh, Pennsylvania and every major metropolitan city in between.

We offer the most recognized pumps, valves, piping and hose manufacturers in the industry for the chemical & fluid process markets. We also support what we sell, providing quality services such as pump repair, valve automation assemblies, pipe fabrication, welded hose fabrications and skid-mounted pump systems. Our experienced shop mechanics are factory-certified and fully capable to handle any fabrication and repair.

We are known for quick, on-time deliveries that are achieved by our network of stocking warehouse locations. Our sales staff and operating system makes the transaction process quick for our customers. Carrying large inventories of quality products and providing quick and competent service is part of the whole package we give you. You can be assured when you request information or place an order with us, it will be handled with "Competence and Speed!"

View our full Company Profile on our Website